10
$\begingroup$

When 3D Printing moves into public beta, you're going to want to get the word out. And fast! One of the best ways to advertise ourselves across the entire Stack Exchange network is through community ads.

So what are these "Community Ads?"

Graduated sites allow the community to advertise relevant products or services within the site, using a system where the community chooses what to advertise. You can find these posts on per-site metas. Hint: these posts have the tag!

Cool! What should the ad be like?

There's a few requirements for these ads. Most notably,

  • They must be 300px wide by 250px tall, or double for "retina" displays
  • There's a limit on file size of 150 kB.
  • The image must be hosted on i.stack.imgur (the Stack Exchange image hosting service).
  • Ads must be GIF or PNG (no animated GIFs).

What else should I know?

To facilitate easy posting to other sites, make sure that the embedded image is of the following format:

[![Tagline to show on mouseover][1]][2]

   [1]: http://image-url
   [2]: http://clickthrough-url 

You can also include a message as a part of your answer with your own thoughts: why you chose some of the elements, and what sites the ads could potentially be posted to. Don't forget to critique each other as well!

Happy Designing!

$\endgroup$
5
  • $\begingroup$ Do you have an example of this done elsewhere? $\endgroup$
    – tbm0115
    Apr 12 '16 at 18:15
  • $\begingroup$ There are many examples on Open Source Meta $\endgroup$
    – Zizouz212
    Apr 12 '16 at 20:20
  • 1
    $\begingroup$ @Zizouz212, long live unicorns! :) $\endgroup$ Apr 14 '16 at 7:36
  • 1
    $\begingroup$ @TormodHaugene You found it. Oh no. $\endgroup$
    – Zizouz212
    Apr 14 '16 at 12:01
  • $\begingroup$ @tbm0115 - Has this been done yet? Sorry if I am behind with the times. $\endgroup$
    – Greenonline Mod
    Jul 5 '18 at 23:46
5
$\begingroup$

I'll try my hand at it and try to get the ball rolling.

Been here?

$\endgroup$
7
  • $\begingroup$ I think some variety of this could be nice to attract people who are already familiar with 3D printing. For other people it might not make much sense, but then, who do we want to attract? $\endgroup$ Apr 14 '16 at 12:49
  • $\begingroup$ I just pulled the photo from Google. It was either that one or a half done print of a head and spaghetti on the side lol $\endgroup$
    – tbm0115
    Apr 14 '16 at 12:51
  • $\begingroup$ There seem to be many good examples in the made section for this model on thingiverse. thingiverse.com/thing:44267/#made $\endgroup$ Apr 14 '16 at 12:56
  • $\begingroup$ Ha! I forgot about that! I think there was another slew of failed prints in the "Occupy Thingiverse" campaign. $\endgroup$
    – tbm0115
    Apr 14 '16 at 12:59
  • $\begingroup$ "Print the Test Cube as ugly as you can and post picture of it as I made one" - brilliant. $\endgroup$ Apr 14 '16 at 13:11
  • $\begingroup$ We could potentially advertise to Open Source SE with Occupy Thingiverse ads lol $\endgroup$
    – tbm0115
    Apr 14 '16 at 13:21
  • $\begingroup$ I like this one. Where does it need to be posted in order to get ads up and running? $\endgroup$
    – Greenonline Mod
    Jul 6 '18 at 10:11
5
$\begingroup$

How about something like:

enter image description here

The post-it design is optional, naturally.

$\endgroup$
0
5
$\begingroup$

I admire Tormod idea.

Here is my version of his picture.

enter image description here enter image description here

$\endgroup$
13
  • $\begingroup$ Nicely drawn! I'd say I favor C. Have you tried making it in the beta theme colors (gray, blue, black?) of 3D Printing Beta? $\endgroup$ May 11 '16 at 6:54
  • $\begingroup$ gray blue black is better as it's more... afrificial :) $\endgroup$ May 11 '16 at 7:50
  • $\begingroup$ Just like the read and brown is more natural. .-) I think they both look good! $\endgroup$ May 11 '16 at 7:54
  • $\begingroup$ Definitely a fan of C and D. Great work! $\endgroup$
    – tbm0115
    May 12 '16 at 14:16
  • $\begingroup$ I really like the idea AND the execution, it is a nice simplified design that appeals a lot to me. However, while it would be a great logo for the site, I don't see it advertising for our site in any way. I would not even identify it connected to 3D printing if I didn't know what it was for. $\endgroup$
    – kamuro
    Jun 10 '16 at 9:53
  • $\begingroup$ @kamuro I got an idea how to increase "the feeling of 3d printing" but I have no time to draw it. It's gonna be the same pictogram but steam/smoge will have shape more like printing head and inner fill wil form 3D letters. Despite that logo doesn't have to be 100% recognizable by it's meaning - compare M for macdonald's but not for butger itself ;) $\endgroup$ Jun 10 '16 at 9:59
  • $\begingroup$ Yeah, but the big M already is well known and doesn't advertise just with the M. As I said, as a logo it's really great. But it won't create the urge in ppl to click the ad, because they won't even know it is an advertisement instead of just good looking design. It needs to tell ppl that they want to learn about 3D printing... $\endgroup$
    – kamuro
    Jun 10 '16 at 10:21
  • $\begingroup$ u r right! i'm trying to find some time... overloaded... overheated... reset... $\endgroup$ Jun 10 '16 at 11:13
  • $\begingroup$ I like the coffee references and the logo idea, but is there anyway to make it '3-D'? $\endgroup$ Jun 12 '16 at 16:20
  • 1
    $\begingroup$ sure it is... patience please :) $\endgroup$ Jun 13 '16 at 4:54
  • $\begingroup$ I'd wear a shirt with option c of d on it! This looks awesome $\endgroup$
    – Diesel
    Mar 17 '17 at 23:13
  • $\begingroup$ Hi darth, how busy are you? Can you make some designs along these ideas? $\endgroup$
    – Greenonline Mod
    Jul 13 '18 at 21:18
  • $\begingroup$ heavy loaded indeed, but in short - you want me to prepare some ads for these forums? $\endgroup$ Jul 15 '18 at 10:42
3
$\begingroup$

here is another trial of logo (kinda evolution to make it more technic and even more simple)

enter image description here

and favico enter image description here

$\endgroup$
4
  • $\begingroup$ +1 This is my favorite over your previous designs! $\endgroup$
    – tbm0115
    Dec 21 '16 at 21:36
  • $\begingroup$ ha! thanx @tbm0115 $\endgroup$ Dec 22 '16 at 8:05
  • $\begingroup$ @darthpixel - Do you have the underlying images for these? I don't know what you made used to create them (photoshop, illustrator, paint, whatever), but if you have the composition files, I'd like to use them to create new ones with other (read: more) text on them. $\endgroup$ Jul 6 '18 at 19:34
  • $\begingroup$ call me outsider but i'm not using mentioned apps. i use xara and it's derivative (photo and graphics designer) $\endgroup$ Jul 9 '18 at 5:20
3
$\begingroup$

here is another proposition it's as "native" as possible i think :)

enter image description here

it's jut a draft so all those curves will be tuned

but i wanted to show the idea

$\endgroup$
1
  • $\begingroup$ \o/ That looks amazing! $\endgroup$
    – Zizouz212
    Sep 8 '17 at 20:31
2
$\begingroup$

As mentioned, here's one related to the Occupy Thingiverse movement. It's simple, but it has a bit of history within the 3D printing community.

enter image description here

$\endgroup$
2
$\begingroup$

enter image description here

Using this guy to post on the facebook groups. As an admin of 3d printing hobbyists I usually see posts get 2-3k views. So We might get as high as 5k+ views. But it seems to be fairly random with Facebooks meddling with what content to show first.

$\endgroup$
2
  • $\begingroup$ I don't really exists as I don't have fb account but if this logo on fb will support our forum - let's give it a try. On the other hand - there was no formal voting for any logo here so I don't know if other members share the vision... $\endgroup$ Dec 24 '16 at 11:57
  • $\begingroup$ Hard to say if there was an impact. I'll try again when it is not christmas. Though I did get a ton of reputation from new questions those 2 weeks.. $\endgroup$
    – StarWind0 Mod
    Feb 6 '17 at 18:13

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .